Circular Saw - Medium-size model (66mm) In Stock Now


  • Circular Saw
  • Cirkelzaag
  • Scie Circulaire


  • Power / Vermogen / Puissance: 1100 W
  • Blade size / Zaagblad / Lame de scie: 165mm
  • No Load Speed RPM: 5500 rpm
  • Blade Bore - mm: 20mm
  • Depth of Cut 90º: 67mm
  • Depth of Cut 45º: 48mm

This saw can be used with Makita and Festool guide rails:

However, you will need an adapter to make this work. Please make a reservation of the adapter as well:

Due to the thickness of the guide rail, the maximum cutting depth is limited to 63mm in this configuration. Bevel cuts (with saw tilted) are also possible while using the adaper, however care must be taken to adjust the saw laterally with regard to the adapter in order to make sure that at the set angle, the blade will still cut right alongside the rail. If this is not properly adjusted, the saw may cut into the rail!

Standard accessories

This tool is supplied with the following accessories:

  • TE267-A1 rip fence
  • TE267-A2 allen key (mounted on machine, below front grip)
  • Carrying case

The blade must be checked out separately and is subject to a usage fee.