Guide rail adapter for Makita HS7101 circular saw Reservation Not Required/Permitted

You do not need to reserve this Item. It is available at the Tool Library during reservation pickup.

Type

• Custom-made adapter to fit Makita circular saw HS7101 (TE125) to a guide rail
• Adapter om Makita HS7101 (TE125) cirkelzaag te gebruiken op een geleiderail
• Adaptateur pour l'utilisation de la scie circulaire Makita HS7101 (TE125) sur rail de guidage

Specs

• Fits Makita and Festool guide rails (e.g. TA116, TA119, TA289)
• Due to the thickness of the adapter and guide rail, the maximum cutting depth is limited to 63 mm in this configuration.
• Bevel cuts (with saw tilted) are also possible while using the adapter, however care must be taken to adjust the saw laterally with regard to the adapter in order to make sure that at the set angle, the blade will still cut right alongside the rail. If this is not properly adjusted, the saw may cut into the rail.